Home repair

[wolf]

I know absolutely nothing about home repair ... but what about stripping and coating with polyurethane, assuming the wood is in reasonably good condition to start? That stuff is like magic.

[xoxoxoBruce]

You don't have a combination storm/screen door on the outside?

[busterb]

Originally Posted by xoxoxoBruce

You don't have a combination storm/screen door on the outside?

Yes, but sometimes it rains when I'm away from home and glass is up

[xoxoxoBruce]

You need an awning over the door...or better yet, a porch. Short of a steel or fiberglass door, it'll be a constant battle.

[Griff]

A little entry way might be just the thing.

[tw]

Originally Posted by xoxoxoBruce

You need an awning over the door...or better yet, a porch. Short of a steel or fiberglass door, it'll be a constant battle.

Bruce has cited a first necessary item. An exterior door should never be exposed directly to the weather. A storm door is a kludge attempt to accomplish same. Any home built responsibly will have a roofed overhang or that doorway recessed into the building. No better solution.

Second, wooden doors are just begging for problems. Wooden doors warp - especially when exposed to weather - and are poor insulators. Wooden doors that are less susceptible are also most expensive – selling to McMansion owners.

Original doors probably can be saved by removing them, burning off failing paint, power sanding, and applying a good primer and paint. Hinges must be so solid as to never more – ever. Oil base paints should be used due to weather of exposure and because no warping is acceptable for a door. Door must be the best sealed exterior building part.

Refinishing is a temporary solution due to existing damage. Best solution is to remove and replace the door with something intended to be structurally sound, provide better security, and will work under heavy traffic.

You need not implement all recommendations to achieve a useful solution.

[Elspode]

The brownish-yellow door appears to be delaminating. That's gonna make repair damn near impossible.

In the absence of a storm door, an exposed wooden door would definitely need several nice, heavy coats of polyurethane, and that means quality prep. However, once suitably prepped and coated in poly, it would be damn near bulletproof. That stuff is amazing.

[footfootfoot]

Originally Posted by wolf

I know absolutely nothing about home repair ... but what about stripping and coating with polyurethane, assuming the wood is in reasonably good condition to start? That stuff is like magic.

I second Wolf on the knowing nothing about home repair AVOID polyurethane like the plague. It won't stand up to the moisture/heat cycling. Even spar varnish will eventually go and need refinishing.

The lower door just (just as though it was not a lot of work) needs to be brought to bare wood, sanded. Prime with benjamin moore fresh start OIL BASED primer. Don't put it on too thick. A little dab'll do ya. Then top coat with Ben Moore oil.

OR skip the paint and primer all together and finish with a semi transparent stain.

The top pic looks like the veneer on the door has gone bad. New door.

And a screen or sun shade will add years to the life of the door.

My south facing door is falling apart and the (latex) paint is shot after 4 years. The north facing door installed and painted at the same time looks brand new.

[busterb]

The guy at store said maybe formica(sp) but couldn't say about glue to keep it on. The uv thing isn't too bad since I've not trimmed the camomilers?flowers? in years. They keep AM sun off house. He wanted to sell me new skins for doors. Hell then I'd be back at same old crap.