8/1/2006: Formula 1 racecar, suspended

xoxoxoBruce · 08-01-2006, 03:42 PM

He did a VW Beetle first. Then a Toyota Starlet with even more pieces (4200 vs 3200 for the F-1), but that one wasn't suspended, just laid out on the floor.

Come to think of it, working 2-D on the floor, rather than 3-D on wires, might be even tougher to show the relationship between the parts, Certainly harder than working 1-D.*

* That's 1-Dumpster..... what I'd need when I couldn't remember how to put it back together.

Wombat · 08-01-2006, 05:39 PM

Quote:

Originally Posted by xoxoxoBruce

He did a VW Beetle first.

I drive a Beetle, I'd love to see what he did with one. Do you have a link please?

Hoof Hearted · 08-01-2006, 08:37 PM

Love it!

Two winters ago husband and I rebuilt the engine in my 'vette. We sent the large parts (block/manifold) to the machine shop and assembled everything ourselves in our garage. I must admit, for a woman, I feel I have more than usual knowledge of how an engine works. Enough that mechanics can't pull any fast ones with me... Anyhow, I thoroughly enjoyed being a part of putting my engine back together and seeing how everything meshed and worked together. AND...how one little thing out of place, or out of time, could spell disaster for the entire engine.
hh

richlevy · 08-01-2006, 10:16 PM

This reminds me of the Body Worlds exhibit that uses layers of real corpses. It's a lot less creepy when done with a car.

Hoof Hearted · 08-01-2006, 10:56 PM

Quote:

Originally Posted by richlevy

...reminds me of the Body Worlds exhibit that uses layers of real corpses...

That exhibit is in Atlanta right now.

incommunicadocat · 08-02-2006, 05:46 PM

Quote:

Originally Posted by richlevy

This reminds me of the Body Worlds exhibit that uses layers of real corpses. It's a lot less creepy when done with a car.

Anatomy for Beginners is currently showing on free-to-air television here in Melbourne, Australia. It's a series by Gunther Von Hagen (the Plastination anatomist that created the Body Worlds exhibit) in which he dissects fresh cadavers in front of a small, non-scientific studio audience. It's incredible! In the first episode he unravelled the spinal cord - beginning by flaying the 55 year old dead man. The sound as the skin came off was obscene. The second episode dealt with the respiratory and circulatory systems, he shoved a pipe into the trachea and inflated the lungs. They rose out of the corpse from the chest cavity from which he had removed ribs and muscular fascia. And then descended as he simulated breathing. Then he filled the artery with simulated blood and we watched as all the blood vessels in the digestive system became red and plump. This week was the digestive system itself, he removed the whole tube from tongue to anus, washing away remaining feces with a spray hose. And unravelled the intestines and laid it out to show the 7 metres in it's entirety. Next week is the reproductive system, and the rumour is he is dissecting a pregnant woman - baby still in place. I find it extraordinary to be able to visualise exactly what's happening in my body and where everything is.
A longer posting than I intended, but it is my first. Hello out there... or should I say in there?

Nothing But Net · 08-03-2006, 06:27 AM

Quote:

Originally Posted by incommunicadocat

Anatomy for Beginners is currently showing on free-to-air television here in Melbourne, Australia... Then he filled the artery with simulated blood and we watched as all the blood vessels in the digestive system became red and plump... Next week is the reproductive system...

That sounds dirty.

CharlieG · 08-03-2006, 12:59 PM

Over the years, I've found that doing an engine, for a car that you have to drive - pay someone else to do it.

BUT if you have all the time you want, don't really CARE, it can be fun to rip down and engine, and put it together. That's what I'm taling about - get something like an old, 1970s era Datsun 1.3L engine (something pre "smog"), put it up on the stand, take it apart, showing the kids HOW it comes apart, and goes together - never intending to ever put it in a car again

Heck - if I find an old lawn mower, that's a start too

Another fun one is a manual transmission - ditto a rear diferential

CharlieG · 08-02-2006, 01:16 PM

Quote:

Originally Posted by Hoof Hearted

...snip... Anyhow, I thoroughly enjoyed being a part of putting my engine back together and seeing how everything meshed and worked together. AND...how one little thing out of place, or out of time, could spell disaster for the entire engine.
hh

You know - there is an idea - I wonder what an engine would cost - put it up on an engine stand, and do it with my son and daughter. I've done it myself, but not in 20 years.

I've also made a single cylinder 2 stroke engine from scratch - as in starting with bocks of metal, and doing all the machining. That is a lot of fun

One of the guys at the local club built the worlds smallest working multi cylinder, 4 cycle motor. I've seen it run - amazing

http://www.minimodelengines.com/index2.htm

Hoof Hearted · 08-02-2006, 06:04 PM

Quote:

Originally Posted by CharlieG

You know - there is an idea - I wonder what an engine would cost - put it up on an engine stand, and do it with my son and daughter. I've done it myself, but not in 20 years.

You know...while we both enjoyed the experience immensely...if we had it to do all over again? We'd buy a GM crate engine ready to go out of the box and with a warranty.
hh

ps...hello kitty!

xoxoxoBruce · 08-02-2006, 09:11 PM

Quote:

Originally Posted by Hoof Hearted

You know...while we both enjoyed the experience immensely...if we had it to do all over again? We'd buy a GM crate engine ready to go out of the box and with a warranty.

Most people learn that eventually.

It's fun and instructive, but always way more expensive and time consuming than you plan on. After the first few it gets to be work.

Welcome to the Cellar, incommunicadocat.

They don't show that program around meal time, do they?
So it's legal for just anyone to dissect bodies, for fun and profit?

Hoof Hearted · 08-02-2006, 09:38 PM

Quote:

Originally Posted by xoxoxoBruce

Most people learn that eventually.

It's fun and instructive, but always way more expensive and time consuming than you plan on.

Oh, husband would instigate my muttering and dirty looks with the sentence; "I need to buy another tool."

xoxoxoBruce · 08-02-2006, 03:52 AM

Quote:

Originally Posted by Wombat

I drive a Beetle, I'd love to see what he did with one. Do you have a link please?

Here ya go.

08-01-2006, 03:42 PM	#1
xoxoxoBruce The future is unwritten Join Date: Oct 2002 Posts: 71,105	He did a VW Beetle first. Then a Toyota Starlet with even more pieces (4200 vs 3200 for the F-1), but that one wasn't suspended, just laid out on the floor. Come to think of it, working 2-D on the floor, rather than 3-D on wires, might be even tougher to show the relationship between the parts, Certainly harder than working 1-D.* * That's 1-Dumpster..... what I'd need when I couldn't remember how to put it back together. __________________ The descent of man ~ Nixon, Friedman, Reagan, Trump.

08-01-2006, 08:37 PM	#3
Hoof Hearted ...you smell something? Join Date: Jul 2006 Location: Monroe, GA Posts: 420	Love it! Two winters ago husband and I rebuilt the engine in my 'vette. We sent the large parts (block/manifold) to the machine shop and assembled everything ourselves in our garage. I must admit, for a woman, I feel I have more than usual knowledge of how an engine works. Enough that mechanics can't pull any fast ones with me... Anyhow, I thoroughly enjoyed being a part of putting my engine back together and seeing how everything meshed and worked together. AND...how one little thing out of place, or out of time, could spell disaster for the entire engine. hh __________________ I have the ability of single-minded determination and focu...Hey, look! A horse!

08-01-2006, 10:16 PM	#4
richlevy King Of Wishful Thinking Join Date: Jan 2001 Location: Philadelphia Suburbs Posts: 6,669	This reminds me of the Body Worlds exhibit that uses layers of real corpses. It's a lot less creepy when done with a car. __________________ Exercise your rights and remember your obligations - VOTE! I have always believed that hope is that stubborn thing inside us that insists, despite all the evidence to the contrary, that something better awaits us so long as we have the courage to keep reaching, to keep working, to keep fighting. -- Barack Hussein Obama

08-03-2006, 12:59 PM	#8
CharlieG Hoodoo Guru Join Date: May 2001 Posts: 301	Over the years, I've found that doing an engine, for a car that you have to drive - pay someone else to do it. BUT if you have all the time you want, don't really CARE, it can be fun to rip down and engine, and put it together. That's what I'm taling about - get something like an old, 1970s era Datsun 1.3L engine (something pre "smog"), put it up on the stand, take it apart, showing the kids HOW it comes apart, and goes together - never intending to ever put it in a car again Heck - if I find an old lawn mower, that's a start too Another fun one is a manual transmission - ditto a rear diferential

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)