Finally - Page 2

Griff · 08-25-2011, 06:26 AM

I think the classes are still in Bath. I took the one week class when I did it, since I already had some construction experience, but other folks with less background did the one-week as well.

infinite monkey · 08-14-2011, 11:20 AM

What a nice addition to Grifftopia. Good work!

Griff · 08-14-2011, 11:56 AM

#1 daughter had an AP art assignment so she grouped my tools for a photo to work from.

Pete Zicato · 08-23-2011, 10:29 AM

Quote:

Originally Posted by Griff

#1 daughter had an AP art assignment so she grouped my tools for a photo to work from.

Please thank your daughter for me. I like the pic so well it is now my desktop.

Griff · 08-23-2011, 10:36 AM

Cool!

footfootfoot · 08-14-2011, 12:19 PM

Totally Grifftopic. Will you miss the water dripping down the back of your neck when you come into the house?

Why is the mortise so deep? Is it a lap or saddle joint?

Griff · 08-14-2011, 02:40 PM

Quote:

Originally Posted by footfootfoot

Totally Grifftopic. Will you miss the water dripping down the back of your neck when you come into the house?

Why is the mortise so deep? Is it a lap or saddle joint?

I'll miss the terminal velocity snow knocking me unconscious when the morning sun warms the roof.

Its a lap joint. I like to have a lot of material around the peg holes to reduce the chances of a full split when I drive it in. The forces on the joint are minimal so it is an aesthetic choice as well.

Undertoad · 08-14-2011, 12:33 PM

You must have an enormous caulk

ing gun

HungLikeJesus · 08-14-2011, 03:10 PM

Do you have any pictures of the wooden pegs?

Griff · 08-14-2011, 03:31 PM

I have an old one of us doing a Yeungling commercial with a peg driven but not cut off. The peg is left with edges so it bites into the joint. You can't use dowels because of weakness since dowels don't follow the grain.

TheMercenary · 08-14-2011, 03:33 PM

thanks. I am going to order those books today. Again, beautiful work. Well done.

TheMercenary · 08-14-2011, 03:35 PM

Did you use a hand drill to drill the holes? what size? or is in some ratio based on the thickness of the wood and joints?

Griff · 08-14-2011, 03:55 PM

I used an inch and a quarter bit in a hand drill. There are some really cool old-timey mortising rigs you can use but for the house frame I only had a long auger bit on a heavy duty Milwalkee drill. I'm sure there are ratios that could be used, but I don't get too caught up in my lack of knowlege, when in doubt I overbuild. Most of timber framing is received knowledge from failures and successes since forever. These are probably as reliable as strength of materials indexes with the exception being old growth lumber had much tighter growth rings and was (is) stronger than modern trees which grew more quickly in less dense environments.

Gravdigr · 08-14-2011, 05:17 PM

classicman · 08-14-2011, 07:43 PM

very cool. looks great.

08-14-2011, 11:56 AM	#3
Griff still says videotape Join Date: Feb 2001 Posts: 26,813	#1 daughter had an AP art assignment so she grouped my tools for a photo to work from. Attached Images __________________ If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis

08-23-2011, 10:36 AM	#5
Griff still says videotape Join Date: Feb 2001 Posts: 26,813	Cool! __________________ If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis

08-14-2011, 12:19 PM	#6
footfootfoot To shreds, you say? Join Date: Aug 2004 Location: in the house and on the street-how many, many feet we meet! Posts: 18,449	Totally Grifftopic. Will you miss the water dripping down the back of your neck when you come into the house? Why is the mortise so deep? Is it a lap or saddle joint? __________________ The internet is a hateful stew of vomit you can never take completely seriously. - Her Fobs Last edited by footfootfoot; 08-14-2011 at 12:51 PM.

08-14-2011, 03:10 PM	#9
HungLikeJesus Only looks like a disaster tourist Join Date: Feb 2007 Location: above 7,000 feet Posts: 7,208	Do you have any pictures of the wooden pegs? __________________ Keep Your Bodies Off My Lawn SteveDallas's Random Thread Picker.

08-14-2011, 03:31 PM	#10
Griff still says videotape Join Date: Feb 2001 Posts: 26,813	I have an old one of us doing a Yeungling commercial with a peg driven but not cut off. The peg is left with edges so it bites into the joint. You can't use dowels because of weakness since dowels don't follow the grain. Attached Images __________________ If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis

08-25-2011, 06:26 AM	#1
Griff still says videotape Join Date: Feb 2001 Posts: 26,813	I think the classes are still in Bath. I took the one week class when I did it, since I already had some construction experience, but other folks with less background did the one-week as well. __________________ If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis

08-14-2011, 11:20 AM	#2
infinite monkey Person who doesn't update the user title Join Date: Mar 2011 Posts: 13,002	What a nice addition to Grifftopia. Good work!

08-14-2011, 12:33 PM	#8
Undertoad Radical Centrist Join Date: Jan 2001 Location: Cottage of Prussia Posts: 31,423	You must have an enormous caulk ing gun

08-14-2011, 03:33 PM	#11
TheMercenary “Hypocrisy: prejudice with a halo” Join Date: Mar 2007 Location: Savannah, Georgia Posts: 21,393	thanks. I am going to order those books today. Again, beautiful work. Well done. __________________ Anyone but the this most fuked up President in History in 2012!

08-14-2011, 03:35 PM	#12
TheMercenary “Hypocrisy: prejudice with a halo” Join Date: Mar 2007 Location: Savannah, Georgia Posts: 21,393	Did you use a hand drill to drill the holes? what size? or is in some ratio based on the thickness of the wood and joints? __________________ Anyone but the this most fuked up President in History in 2012!

08-14-2011, 03:55 PM	#13
Griff still says videotape Join Date: Feb 2001 Posts: 26,813	I used an inch and a quarter bit in a hand drill. There are some really cool old-timey mortising rigs you can use but for the house frame I only had a long auger bit on a heavy duty Milwalkee drill. I'm sure there are ratios that could be used, but I don't get too caught up in my lack of knowlege, when in doubt I overbuild. Most of timber framing is received knowledge from failures and successes since forever. These are probably as reliable as strength of materials indexes with the exception being old growth lumber had much tighter growth rings and was (is) stronger than modern trees which grew more quickly in less dense environments. __________________ If you would only recognize that life is hard, things would be so much easier for you. - Louis D. Brandeis

08-14-2011, 05:17 PM	#14
Gravdigr The Un-Tuckian Join Date: Apr 2007 Location: South Central...KY that is Posts: 39,517	__________________ These statements have not been evaluated by the FDA, EPA, FBI, DEA, CDC, or FDIC. These statements are not intended to diagnose, cause, treat, cure, or prevent any disease. If you feel you have been harmed/offended by, or, disagree with any of the above statements or images, please feel free to fuck right off.

08-14-2011, 07:43 PM	#15
classicman barely disguised asshole, keeper of all that is holy. Join Date: Nov 2007 Posts: 23,401	very cool. looks great. __________________ "like strapping a pillow on a bull in a china shop" Bullitt

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)