The Cellar  

Go Back   The Cellar > Main > Creative Expression

Creative Expression Post your own works and chat about them

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-10-2011, 09:37 PM   #8
BigV
Goon Squad Leader
 
Join Date: Nov 2004
Location: Seattle
Posts: 27,063
See? I TOLD YOU they stuck way up!

I think the lighter spots were colder / wetter. No matter, paint covers a multitude of sins.

Name:  IMG_6829.JPG
Views: 1677
Size:  88.3 KB

Now the spikes around the perimeter have been made and attached and papered on. Something to note here, there are some tinier strips placed on the surface, not near the spikes on the edge. These are little patches that cover rougher spots. I now know that the big strips, while wet, still have some stiffness when twisted over the compound curves of this complex shape. I learned mid-mask that one way to deal with this is to use little patches like this instead of big long strips. One really brilliant idea was to use many small triangles over a surface like this! That's really smart. Of course, you need enough base surface to hold the triangles but they can be tiled with practically no bending and buckling. Noted for future reference!

Name:  IMG_6881.JPG
Views: 1690
Size:  118.0 KB

Here's a nice little closeup of the spikes on the edge. I started out with a long narrow v of wire that I wound a wad of paper around in the rough size and shape of the spikes. Then I "finished" the shape with masking tape. Then I used the long protruding ends of the v to punch through and wind around the triple wire that comprised the rim of the mask. I say "I" and that's true. For the first one. SonofV did the other nine.

Once they were all wired in place, they got papered on.


Name:  IMG_6882.JPG
Views: 1878
Size:  113.6 KB

Ok. This was actual fire. I'm guilty of being impatient and under the gun timewise. I wanted to try to cycle two layers in one day. Remember the oversize problem with the bulgy eyes? Yeah.... the spikes... they exacerbated this problem raising the damn mask even higher since I had to put it in at an angle. And.. I might have had a problem with the oven because I had cooked in it this same day. It was already hot, too hot, obviously. I'd set it (back down) to about 250 degrees, but it was still blazing from the cookies I'd made earlier. Just stupid. Lucky, but stupid. Fortunately all the fire was on the inside, and didn't pierce the outer surface except in one tiny place. Where the left eyehole would be. Definitely lucky.

Name:  IMG_6883.JPG
Views: 1646
Size:  134.9 KB
__________________
Be Just and Fear Not.

Last edited by BigV; 11-10-2011 at 09:44 PM. Reason: wrong eye
BigV is offline   Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 06:44 PM.


Powered by: vBulletin Version 3.8.1
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.