Are you handy?

SteveDallas · 07-19-2007, 09:37 PM

We just recently laid out $$$$ for the roof. (Not only the roof, but we had to get a couple overgrown trees pruned back before we could do that, and then we discovered that the roof of the back porch had separated from the house.....)

Anyway, I'm very good at assembling pieces.

If I have to change the pieces... like, say, drill a hole in the wall... cut a piece of wood down to size... etc. ... it's usually trouble. Big trouble.

We tore up the carpet in our living room and dining room last year. It was really crappy, and we had essentially been waiting for the kids to grow past the stage of messing it up. (We now know this will never pass.) We suspected there were very nice hardwood floors under, and there were. But now I need to put in some molding down at the baseboard. Should be interesting....

xoxoxoBruce · 07-19-2007, 09:59 PM

Go for a nautical theme and put rope along the baseboard.

SteveDallas · 07-23-2007, 09:25 PM

Quote:

Originally Posted by SteveDallas

But now I need to put in some molding down at the baseboard. Should be interesting....

I've done worse. (Only half the dining room so far... we were moving stuff around to accommodate a new china cabinet, and it seemed silly to not do it while the space was empty.)

yesman065 · 07-23-2007, 10:31 PM

OK handy people - I have finished the kitchen, front window, pergo flooring in the dining area, replaced 6 doors, skim coated the entire downstairs and the painting has commenced. (Pics to folow if I can figure out the camera) My question is that I'm thinking of installing a vent fan in the attic. The one that goes out the roof. I'm fine indoors, but cutting a hole in my roof scares the hell outta me. Any help, suggestions tips and so on?

glatt · 07-24-2007, 08:00 AM

Quote:

Originally Posted by yesman065

My question is that I'm thinking of installing a vent fan in the attic. The one that goes out the roof. I'm fine indoors, but cutting a hole in my roof scares the hell outta me. Any help, suggestions tips and so on?

Why a roof fan? Is this to ventilate the attic to reduce cooling costs? Or is this to vent a bathroom, or kitchen stove, etc.?

yesman065 · 07-24-2007, 09:51 AM

Quote:

Originally Posted by glatt

Why a roof fan? Is this to ventilate the attic to reduce cooling costs? Or is this to vent a bathroom, or kitchen stove, etc.?

Attic ventilation - Its been a big help to a lot of neighbors while saving money and all too - so I'm thinkin about it.

glatt · 07-24-2007, 10:42 AM

Are you sure a roof fan is your only/the best option?

In many cases, putting in soffit vents and a ridge vent for passive air circulation is more than enough and then you don't have the electricity charges later. The hot air rises and goes out the ridge and is replaced by cool air drawn into the soffits. The beauty of a ridge vent is that even though you are cutting a long slot at the peak of the roof, there is very little water to deal with at the peak. So you just nail or screw the ridge vent down. You don't need to worry about flashing around the opening. Some are even low profile so you don't notice them.

If you check out building science's web site, they have a lot of detailed information on the best way to ventilate an attic. They believe in soffit vents and ridge vents. I don't know where you live, but they have lots of different models for the best way to build houses in various locations. Here's an example for a house in Charlotte, N.C.

Another option is to put gable vents in the attic walls at the ends of the house. You don't really have to worry about water there either. You can put one in each end, and get cross breezes, or you can put a fan in as well.

I don't know your house layout, or your location, but for my house, a powered roof fan would be the last option. They are ugly, consume electricity, and you have to worry about flashing around them so they don't leak.

Don't forget that you need to put a vent somewhere else to let air into your attic to replace any air you try to blow out. If you don't, you can suck air from inside your home, and this is often replaced by air back drafting down your chimney. Carbon monoxide is a concern then.

07-19-2007, 09:59 PM	#2
xoxoxoBruce The future is unwritten Join Date: Oct 2002 Posts: 71,105	Go for a nautical theme and put rope along the baseboard. __________________ The descent of man ~ Nixon, Friedman, Reagan, Trump.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-19-2007, 09:37 PM	#1
SteveDallas Your Bartender Join Date: Jan 2002 Location: Philly Burbs, PA Posts: 7,651	We just recently laid out $$$$ for the roof. (Not only the roof, but we had to get a couple overgrown trees pruned back before we could do that, and then we discovered that the roof of the back porch had separated from the house.....) Anyway, I'm very good at assembling pieces. If I have to change the pieces... like, say, drill a hole in the wall... cut a piece of wood down to size... etc. ... it's usually trouble. Big trouble. We tore up the carpet in our living room and dining room last year. It was really crappy, and we had essentially been waiting for the kids to grow past the stage of messing it up. (We now know this will never pass.) We suspected there were very nice hardwood floors under, and there were. But now I need to put in some molding down at the baseboard. Should be interesting....

07-23-2007, 10:31 PM	#4
yesman065 Banned - Self Imposed Join Date: Dec 2005 Posts: 1,847	OK handy people - I have finished the kitchen, front window, pergo flooring in the dining area, replaced 6 doors, skim coated the entire downstairs and the painting has commenced. (Pics to folow if I can figure out the camera) My question is that I'm thinking of installing a vent fan in the attic. The one that goes out the roof. I'm fine indoors, but cutting a hole in my roof scares the hell outta me. Any help, suggestions tips and so on?

07-24-2007, 10:42 AM	#7
glatt ™ Join Date: Jul 2003 Location: Arlington, VA Posts: 27,717	Are you sure a roof fan is your only/the best option? In many cases, putting in soffit vents and a ridge vent for passive air circulation is more than enough and then you don't have the electricity charges later. The hot air rises and goes out the ridge and is replaced by cool air drawn into the soffits. The beauty of a ridge vent is that even though you are cutting a long slot at the peak of the roof, there is very little water to deal with at the peak. So you just nail or screw the ridge vent down. You don't need to worry about flashing around the opening. Some are even low profile so you don't notice them. If you check out building science's web site, they have a lot of detailed information on the best way to ventilate an attic. They believe in soffit vents and ridge vents. I don't know where you live, but they have lots of different models for the best way to build houses in various locations. Here's an example for a house in Charlotte, N.C. Another option is to put gable vents in the attic walls at the ends of the house. You don't really have to worry about water there either. You can put one in each end, and get cross breezes, or you can put a fan in as well. I don't know your house layout, or your location, but for my house, a powered roof fan would be the last option. They are ugly, consume electricity, and you have to worry about flashing around them so they don't leak. Don't forget that you need to put a vent somewhere else to let air into your attic to replace any air you try to blow out. If you don't, you can suck air from inside your home, and this is often replaced by air back drafting down your chimney. Carbon monoxide is a concern then.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)