HappyMonkey/HMD WOODSHOP

glatt · 03-10-2005, 12:13 PM

Wednesday evening, I cut the sheets of plywood into more manageable sizes using a hand held circular saw. A little oversize for each panel. I finished up each panel on the table saw, which produces cleaner results. Then I used a router to cut grooves (dadoes, actually) into the sides of the first cabinet to accept a shelf. Here, I'm setting up to cut a rabbet, which is a lip that accepts the top of the cabinet. I'll also put a rabbet on the bottom.

03-10-2005, 12:13 PM	#10
glatt ™ Join Date: Jul 2003 Location: Arlington, VA Posts: 27,717	Wednesday evening, I cut the sheets of plywood into more manageable sizes using a hand held circular saw. A little oversize for each panel. I finished up each panel on the table saw, which produces cleaner results. Then I used a router to cut grooves (dadoes, actually) into the sides of the first cabinet to accept a shelf. Here, I'm setting up to cut a rabbet, which is a lip that accepts the top of the cabinet. I'll also put a rabbet on the bottom. Attached Images

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)