|
The procedure for this kind of roofing is to cut several sections, nine inches wide, and nail them to the edge of the roof, in the area that will be covered by the roll roofing. These small sections are very securely nailed to the roof. The instructions call for two rows of nails, one inch in from the edges, spaced four inches apart. I generously overlapped these edge strips. This is the surface that will receive the asphalt roofing cement.
Pic 01: East rake, looking north.
Pic 02: Detail of edge strip, along ridge. Plenty of nails. Hand nailed nails.
__________________
Be Just and Fear Not.
|