Quote:
Originally Posted by glatt
Yeah, it's looking like I have to rent some sort of a set top box for around $10-$20 a month to get the TV service.
|
With either service, the cable must enter into a master box. That box separated the TV, internet and telephone signals.
An RJ-11 telephone receptacle connects your existing phone via a standard RJ-11 connector. You could even connect one phone directly instead of the entire house.
An RJ-6 connector connects all cable TV wires to that port. RJ-6 port. Generally, a decoder box at each TV determines what services you have authorized. And becomes the remote control box.
A router connects directly into an RJ-45 receptacle - just like the ethernet cables you currently have. They generally provide that Wifi router - another box.
With either service, first route phone lines and ethernet wires to that common service entrance location. They will probably route new RG-6 coax cables to each TV.
Best is to already have a two plug receptacle waiting for their service to connect to. Better is to have that powered from its own circuit or from a lightly used circuit - one not likely to trip. Best for hardware protection is that cable (Comcast or Fios) entering at the same location as AC electric. And to an earth ground rod that you were required to have and connected to the breaker box.
Best to have an open location on that wall where a maybe 3 x 3 foot plywood sheet can become the mouting surface for their interface box and battery backup power box. And maybe the WiFi router. IOW at least two AC receptacles will be required.