The Cellar - View Single Post

lumberjim · 01-04-2019, 11:09 AM

Not really happy with the glue on the edges

I took the edges of the finger board off with the band saw within about 1/16" free hand, then put it on the router table to get it flush.

To fill the little gaps, I sanded and packed the saw dust into the gaps. Then I ran a bead of super glue along the seam. Hit it with accelerator and sanded again. It's acceptable.

I also reshaped the head stock a bit.

01-04-2019, 11:09 AM	#119
lumberjim I can hear my ears Join Date: Oct 2003 Posts: 25,571	Not really happy with the glue on the edges I took the edges of the finger board off with the band saw within about 1/16" free hand, then put it on the router table to get it flush. To fill the little gaps, I sanded and packed the saw dust into the gaps. Then I ran a bead of super glue along the seam. Hit it with accelerator and sanded again. It's acceptable. I also reshaped the head stock a bit. __________________ This body holding me reminds me of my own mortality Embrace this moment, remember We are eternal, all this pain is an illusion ~MJKeenan