The Cellar

The Cellar (http://cellar.org/index.php)
-   Quality Images and Videos (http://cellar.org/forumdisplay.php?f=22)
-   -   Machines (http://cellar.org/showthread.php?t=31838)

Diaphone Jim 07-15-2020 02:39 PM

The top part of your post is indeed an ad.
The video has some strange ways of testing and, even if the bolt has been sacrificed for the explanation, it hurts me to see it clamped by its threads in a vice.
I do not use either the break off at torque or the machining routine.
I don't see the strength spec of the colored bolts, but they are 12 times the cost of regular Grade 8's.
I really don't want the grade 8's holding my wheels on, my third member secure or my cylinder head tight with whatever those are with a hole drilled down the middle to install the stretchy part.
The cost of my torque wrenches are probably currently in the ranges of less than a penny per use.
I can't say there might not be a good place for them, but I don't have one.
So there, now we are equally grouchy.

BigV 07-15-2020 04:31 PM

Quote:

Originally Posted by Diaphone Jim (Post 1055266)
snip--
So there, now we are equally grouchy.

Bold words my friend, bold words.

xoxoxoBruce 07-16-2020 12:06 AM

Quote:

Originally Posted by Diaphone Jim (Post 1055266)
The top part of your post is indeed an ad.

No it is not. I'm quite sure be cause I made that from information I gathered and put together to email to some people who would be interested and I kiddingly accused of holding out on me.

Quote:

The video has some strange ways of testing and, even if the bolt has been sacrificed for the explanation, it hurts me to see it clamped by its threads in a vice.
How else would you find out how it works besides cutting it open? Worrying about the threads is like worrying the medical examiner doing the autopsy will pull the stiffs hair.

Quote:

I can't say there might not be a good place for them, but I don't have one.
The cost analysis shows not all applications warrant the high cost. Also different applications of the same size bolt often call out different torques so I doubt you'll find these in a hardware store.

xoxoxoBruce 07-18-2020 04:43 PM

1 Attachment(s)
Fords make nice waterfalls..

Griff 07-19-2020 07:39 AM

I like how it's pouring out of the radiator...

xoxoxoBruce 07-26-2020 09:05 PM

1 Attachment(s)
A spiffy Maris Transport truck taken at South Bend Indiana in the late 30's...

xoxoxoBruce 08-11-2020 12:14 AM

1 Attachment(s)
When one has the responsibility of maintaining the lawn it wouldn't do to shirk that responsibility.
However we can comport ourselves in a civilized manor rather than suffer the slings and arrows of perspiration and ring around the collar.

Diaphone Jim 08-11-2020 01:48 PM

With two sources of CO to pump in, it could be a dream job.

Griff 08-11-2020 01:55 PM

lol Worse ways to go I guess.

Gravdigr 08-11-2020 06:31 PM

Quote:

Originally Posted by xoxoxoBruce (Post 1055762)
A spiffy Maris Transport truck taken at South Bend Indiana in the late 30's...

That hauler is so damn cool...

...and the black piece of sexiness on top is mine, so keep ya crummy dick-beaters off it!:mad:

Griff 08-12-2020 06:12 AM

That car has moonshiner written all over it. nice

Gravdigr 08-12-2020 09:44 PM

That would make a tanker. Take out the interior and build a giant tank for the white gold.

I miss me some corn-in-a-jar. Gonna be a while yet...Gotta get rid o'some o'these pills.

xoxoxoBruce 09-05-2020 03:16 AM

1 Attachment(s)
Be safe, tie on your hard hat...

xoxoxoBruce 09-10-2020 09:52 PM

1 Attachment(s)
The only civilized way to gawk at Mowgli and his pets.

BigV 09-14-2020 02:41 PM

Serious machines.




All times are GMT -5. The time now is 06:05 AM.

Powered by: vBulletin Version 3.8.1
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.